Enhance Productivity with Premium Floor Scales

Stainless steel up to AISI 316, free-size dimensions, elaborated accessories, such as approach ramps and pit frames, and easy-of-use: the new raisable weighing platforms PFA579x and the PFA779lift are premium products that help you boost productivity in any industrial environment.

PFA579(x)lift: Wet or Humid, hazardous or harsh - always a clean job!
Ruggedness, easy handling, longevity are the strengths of the PFA579(x)lift. Able to withstand any industrial environments where regular cleaning matters. The reinforced load plate and the welded tubular frame guarantee maximum torsion resistance at a low overall height of only 80 mm. Opening and closing procedures require minimum energy thanks to optimized pneumatic springs. 

PFA779lift: Hygienic design - clever design for any application areas!
Cross-contaminations have no chance anymore with the new PFA779lift’s hygienic design thanks to the hermetically welded special section tubes and the measuring cell cables laid in the scale’s interior and tightened by screwed cable glands. The clever design enables detection of potential contamination spots and facilitates cleaning in all areas of the scale. All moveable bearings are sealed by synthetic seals which avoid hidden dirt or even crevice corrosion.  

Simple and direct connection
With the digital IDNet scale interface, the weighing platforms can be used right away: plug 'n‘ weigh!

The “Swinging" scales: how metrology and reliability make a difference
The PFA579(x) and PFA779lift floor scales convince by outstanding metrological features. The special rocker foot enables the scale to oscillate freely and to absorb vibrations and movements such as the transverse forces acting during the loading and unloading procedures. This allows for fast, accurate and repeatable weighing results – constantly and consistently.

PFA579(x)lift and PFA779 lift: Full attention to details

• Rigid and robust: the highly reinforced load plate facilitates vehicles driving over the scale and prevents the load plate from being bent.
• Well positioned and installed: secure the chain, raise with the crane, set down at the place of installation and align, if required – it couldn’t be any simpler.
• Low-profile and elegant: Setting a benchmark for floor scales with a height of just 80 mm.
• Maximum metrology guaranteed: Hermetically sealed, stainless steel load cell with integrated overload protection, high degree of IP protection and rocker feet
• Always achieving the right level: Level monitoring provided by integrated level indicator
• Robust & durable: Torsionally-rigid tubular design for minimum deflection at maximum loads
• Sophisticated design: Cleaning into the deepest, darkest corners
• Closed and locked: The automatic locking mechanism of the load plate means that manual locking is  a thing of the past.

Hazardous area requirements? No problems!
The standard models of the PFA579lift and PFA779lift line can be used in both safe and hazardous areas of Category 3 at no additional cost. Finally the hazardous area version PFA579x can be used in Zones 1 and 21 of Category 2 in conjunction with the numerous, intrinsically safe display units, such as IND560x, IND226x with the PSUx power supply unit or outside the zone with the ACM500 interface adapter.